Bioloren metal free dental system

High Density Reinforcement Ribbon

InFibra
Ribbon with Fiber for Dental Use (Patented)

Product: InFibra is made of long longitudinal white and high crystallized polyethylene fibers, that give high mechanical characteristics, ideal for dental use.

The special interlacing enables a net cut and the complete padding with all flowable resin composites, unfilled and acrylic resin.

InFibra's Instructions for Use

1. Draw the right quantities of InFibra ribbon using clear tweezers;
2. Do not touch without use of gloves;

3. InFibra ribbon can be cut using our sharp special nippers;
4. If InFibra ribbon is used with composites it must be wet in advance with a bonding agent;

InFibra's Recommended Uses:

• Periodontal Splinting
• Spacers and Retention
• Orthodontic Retainers
• Fixing of Bridges and Prostheses
• Reinforcement of Loose Teeth in Composite or Resin
• Temporary Stabilization of Artificial Teeeth
• Provisional Bridges
• Creation of Endodontic Post and Core

5. InFibra used with acrylic resins must be wet with a monomer;
6. The hand made product of InFibra must be covered with a resin composite;

7. If the resin is worn out, we advise applying a new layer to avoid exoposure of fibers;

Kit comes with a special carrying case containing:
1 spool of 1 mm (tubular), 2mm, 3mm, 4mm
each with 0,5 meter ((19,7 inches) of InFibra ribbon material per spool
plus one pair of special cutting nippers.

Refills are available in 4 width
1mm # tubular Contains 0,5 meter ((19,7 inches)
2mm # 1202 Contains 0,5 meter ((19,7 inches)
3mm # 1203 Contains 0,5 meter ((19,7inches)
4mm # 1204 Contains 0,5 meter (19,7 inches)

Special cutting Nippers 1200N
# 1200N Needed to cut InFibra

In 2011 Bioloren introduces the 25mm-height InFibra Ribbon

8. Used together with our URC dual cement and fiber abutments one can obtain all elements for the quickest restaurative tecnique at the dentist's chair;

9. InFibra is made in Italy and does have not an expiration date, if it is protected from intense light and pollutants.

Finally, there is a liturature on where to apply splinting, carried out with polyethylene fibres (related article).